import os from time import sleep, time from sys import argv from os import scandir from os.path import exists from paramiko import SSHClient, AutoAddPolicy from json import loads import pandas def traversal_files(path, w2t): if not exists(path): msg = f'数据文件夹{path}不存在，请确认后重试......' w2t(msg, 0, 1, 'red', tab_name='Automatic Test') else: dirs = [] files = [] for item in scandir(path): if item.is_dir(): dirs.append(item.path) elif item.is_file(): files.append(item.path) return dirs, files def check_files(path, loadsel, data_dirs, data_files, w2t): if len(data_dirs) != 0 or len(data_files) != 3: w2t('初始路径下不允许有文件夹，且初始路径下只能存在如下三个文件，确认后重新运行！', 0, 0, 'red', tab_name='Automatic Test') w2t(' 1. configs.xlsx\n 2. T_电机电流.xlsx\n 3. xxxx.zip', 0, 1, 'red', tab_name='Automatic Test') config_file = current_file = prj_file = None for data_file in data_files: filename = data_file.split('\\')[-1] if filename == 'configs.xlsx': config_file = data_file elif filename == 'T_电机电流.xlsx': current_file = data_file elif filename.endswith('.zip'): prj_file = data_file else: w2t('初始路径下不允许有文件夹，且初始路径下只能存在如下三个文件，确认后重新运行！', 0, 0, 'red', tab_name='Automatic Test') w2t(' 1. configs.xlsx\n 2. T_电机电流.xlsx\n 3. xxxx.zip', 0, 1, 'red', tab_name='Automatic Test') if config_file and current_file and prj_file: w2t("数据目录合规性检查结束，未发现问题......", tab_name='Automatic Test') if loadsel == 'tool100': os.mkdir(f"{path}\\single") os.mkdir(f"{path}\\s_1") os.mkdir(f"{path}\\s_2") os.mkdir(f"{path}\\s_3") elif loadsel == 'inertia': os.mkdir(f"{path}\\inertia") return config_file, current_file, prj_file else: w2t('初始路径下不允许有文件夹，且初始路径下只能存在如下三个文件，确认后重新运行！', 0, 0, 'red', tab_name='Automatic Test') w2t(' 1. configs.xlsx\n 2. T_电机电流.xlsx\n 3. xxxx.zip', 0, 1, 'red', tab_name='Automatic Test') def prj_to_xcore(prj_file): ssh = SSHClient() ssh.set_missing_host_key_policy(AutoAddPolicy()) ssh.connect('192.168.0.160', 22, username='luoshi', password='luoshi2019') sftp = ssh.open_sftp() sftp.put(prj_file, '/tmp/target.zip') cmd = 'cd /tmp; rm -rf target/; mkdir target; unzip -d target/ -q target.zip; ' cmd += 'chmod 777 -R target/; rm target.zip' ssh.exec_command(cmd) cmd = 'sudo rm -rf /home/luoshi/bin/controller/projects/target; ' cmd += 'sudo mv /tmp/target/ /home/luoshi/bin/controller/projects/' stdin, stdout, stderr = ssh.exec_command(cmd, get_pty=True) stdin.write('luoshi2019' + '\n') stdin.flush() print(stdout.read().decode()) # 必须得输出一下stdout，才能正确执行sudo print(stderr.read().decode()) # 顺便也执行以下stderr # _prj_name = prj_file.split('\\')[-1].removesuffix('.zip') cmd = 'cd /home/luoshi/bin/controller/; ' cmd += f'sudo mv projects/target/_build/*.prj projects/target/_build/target.prj' stdin, stdout, stderr = ssh.exec_command(cmd, get_pty=True) stdin.write('luoshi2019' + '\n') stdin.flush() print(stdout.read().decode()) # 必须得输出一下stdout，才能正确执行sudo print(stderr.read().decode()) # 顺便也执行以下stderr ssh.close() def execution(cmd, hr, w2t, **kwargs): _id = hr.execution(cmd, **kwargs) _msg = hr.get_from_id(_id) if not _msg: w2t(f"无法获取{_id}请求的响应信息", 0, 7, 'red', tab_name='Automatic Test') else: _response = loads(_msg) if not _response: w2t(f"无法获取{id}请求的响应信息", 0, 1, 'red', tab_name='Automatic Test') return _response def data_proc_regular(path, filename, channel, scenario_time): if channel in list(range(6)): with open(filename, 'r', encoding='utf-8') as f_obj: lines = f_obj.readlines() _d2d_vel = {'hw_joint_vel_feedback': []} _d2d_trq = {'device_servo_trq_feedback': []} for line in lines: data = eval(line.strip())['data'] for item in data: item['value'].reverse() if item.get('channel', None) == channel and item.get('name', None) == 'hw_joint_vel_feedback': _d2d_vel['hw_joint_vel_feedback'].extend(item['value']) elif item.get('channel', None) == channel and item.get('name', None) == 'device_servo_trq_feedback': _d2d_trq['device_servo_trq_feedback'].extend(item['value']) df1 = pandas.DataFrame.from_dict(_d2d_vel) df2 = pandas.DataFrame.from_dict(_d2d_trq) df = pandas.concat([df1, df2], axis=1) _filename = f'{path}\\single\\j{channel+1}_single_{time()}.data' df.to_csv(_filename, sep='\t', index=False) elif channel in list(range(6, 9)): with open(filename, 'r', encoding='utf-8') as f_obj: lines = f_obj.readlines() _d2d_vel_0 = {'hw_joint_vel_feedback': []} _d2d_trq_0 = {'device_servo_trq_feedback': []} _d2d_vel_1 = {'hw_joint_vel_feedback': []} _d2d_trq_1 = {'device_servo_trq_feedback': []} _d2d_vel_2 = {'hw_joint_vel_feedback': []} _d2d_trq_2 = {'device_servo_trq_feedback': []} _d2d_vel_3 = {'hw_joint_vel_feedback': []} _d2d_trq_3 = {'device_servo_trq_feedback': []} _d2d_vel_4 = {'hw_joint_vel_feedback': []} _d2d_trq_4 = {'device_servo_trq_feedback': []} _d2d_vel_5 = {'hw_joint_vel_feedback': []} _d2d_trq_5 = {'device_servo_trq_feedback': []} for line in lines: data = eval(line.strip())['data'] for item in data: item['value'].reverse() if item.get('channel', None) == 0 and item.get('name', None) == 'hw_joint_vel_feedback': _d2d_vel_0['hw_joint_vel_feedback'].extend(item['value']) elif item.get('channel', None) == 0 and item.get('name', None) == 'device_servo_trq_feedback': _d2d_trq_0['device_servo_trq_feedback'].extend(item['value']) elif item.get('channel', None) == 1 and item.get('name', None) == 'hw_joint_vel_feedback': _d2d_vel_1['hw_joint_vel_feedback'].extend(item['value']) elif item.get('channel', None) == 1 and item.get('name', None) == 'device_servo_trq_feedback': _d2d_trq_1['device_servo_trq_feedback'].extend(item['value']) elif item.get('channel', None) == 2 and item.get('name', None) == 'hw_joint_vel_feedback': _d2d_vel_2['hw_joint_vel_feedback'].extend(item['value']) elif item.get('channel', None) == 2 and item.get('name', None) == 'device_servo_trq_feedback': _d2d_trq_2['device_servo_trq_feedback'].extend(item['value']) elif item.get('channel', None) == 3 and item.get('name', None) == 'hw_joint_vel_feedback': _d2d_vel_3['hw_joint_vel_feedback'].extend(item['value']) elif item.get('channel', None) == 3 and item.get('name', None) == 'device_servo_trq_feedback': _d2d_trq_3['device_servo_trq_feedback'].extend(item['value']) elif item.get('channel', None) == 4 and item.get('name', None) == 'hw_joint_vel_feedback': _d2d_vel_4['hw_joint_vel_feedback'].extend(item['value']) elif item.get('channel', None) == 4 and item.get('name', None) == 'device_servo_trq_feedback': _d2d_trq_4['device_servo_trq_feedback'].extend(item['value']) elif item.get('channel', None) == 5 and item.get('name', None) == 'hw_joint_vel_feedback': _d2d_vel_5['hw_joint_vel_feedback'].extend(item['value']) elif item.get('channel', None) == 5 and item.get('name', None) == 'device_servo_trq_feedback': _d2d_trq_5['device_servo_trq_feedback'].extend(item['value']) df_01 = pandas.DataFrame.from_dict(_d2d_vel_0) df_02 = pandas.DataFrame.from_dict(_d2d_trq_0) df = pandas.concat([df_01, df_02], axis=1) _filename = f'{path}\\s_{channel-5}\\j1_s_{channel-5}_{scenario_time}_{time()}.data' df.to_csv(_filename, sep='\t', index=False) df_01 = pandas.DataFrame.from_dict(_d2d_vel_1) df_02 = pandas.DataFrame.from_dict(_d2d_trq_1) df = pandas.concat([df_01, df_02], axis=1) _filename = f'{path}\\s_{channel-5}\\j2_s_{channel-5}_{scenario_time}_{time()}.data' df.to_csv(_filename, sep='\t', index=False) df_01 = pandas.DataFrame.from_dict(_d2d_vel_2) df_02 = pandas.DataFrame.from_dict(_d2d_trq_2) df = pandas.concat([df_01, df_02], axis=1) _filename = f'{path}\\s_{channel-5}\\j3_s_{channel-5}_{scenario_time}_{time()}.data' df.to_csv(_filename, sep='\t', index=False) df_01 = pandas.DataFrame.from_dict(_d2d_vel_3) df_02 = pandas.DataFrame.from_dict(_d2d_trq_3) df = pandas.concat([df_01, df_02], axis=1) _filename = f'{path}\\s_{channel-5}\\j4_s_{channel-5}_{scenario_time}_{time()}.data' df.to_csv(_filename, sep='\t', index=False) df_01 = pandas.DataFrame.from_dict(_d2d_vel_4) df_02 = pandas.DataFrame.from_dict(_d2d_trq_4) df = pandas.concat([df_01, df_02], axis=1) _filename = f'{path}\\s_{channel-5}\\j5_s_{channel-5}_{scenario_time}_{time()}.data' df.to_csv(_filename, sep='\t', index=False) df_01 = pandas.DataFrame.from_dict(_d2d_vel_5) df_02 = pandas.DataFrame.from_dict(_d2d_trq_5) df = pandas.concat([df_01, df_02], axis=1) _filename = f'{path}\\s_{channel-5}\\j6_s_{channel-5}_{scenario_time}_{time()}.data' df.to_csv(_filename, sep='\t', index=False) elif channel in list(range(9, 15)): with open(filename, 'r', encoding='utf-8') as f_obj: lines = f_obj.readlines() _d2d_vel = {'hw_joint_vel_feedback': []} _d2d_trq = {'device_servo_trq_feedback': []} for line in lines: data = eval(line.strip())['data'] for item in data: item['value'].reverse() if item.get('channel', None) == channel-9 and item.get('name', None) == 'hw_joint_vel_feedback': _d2d_vel['hw_joint_vel_feedback'].extend(item['value']) elif item.get('channel', None) == channel-9 and item.get('name', None) == 'device_servo_trq_feedback': _d2d_trq['device_servo_trq_feedback'].extend(item['value']) df1 = pandas.DataFrame.from_dict(_d2d_vel) df2 = pandas.DataFrame.from_dict(_d2d_trq) df = pandas.concat([df1, df2], axis=1) _filename = f'{path}\\single\\j{channel-8}_hold_{time()}.data' df.to_csv(_filename, sep='\t', index=False) def data_proc_inertia(path, filename, channel): with open(filename, 'r', encoding='utf-8') as f_obj: lines = f_obj.readlines() _d2d_vel = {'hw_joint_vel_feedback': []} _d2d_trq = {'device_servo_trq_feedback': []} for line in lines: data = eval(line.strip())['data'] for item in data: item['value'].reverse() if item.get('channel', None) == channel+3 and item.get('name', None) == 'hw_joint_vel_feedback': _d2d_vel['hw_joint_vel_feedback'].extend(item['value']) elif item.get('channel', None) == channel+3 and item.get('name', None) == 'device_servo_trq_feedback': _d2d_trq['device_servo_trq_feedback'].extend(item['value']) df1 = pandas.DataFrame.from_dict(_d2d_vel) df2 = pandas.DataFrame.from_dict(_d2d_trq) df = pandas.concat([df1, df2], axis=1) _filename = f'{path}\\inertia\\j{channel+4}_inertia_{time()}.data' df.to_csv(_filename, sep='\t', index=False) def gen_result_file(path, loadsel, disc, number, scenario_time): filename = path + f'\\data.txt' with open(filename, 'w', encoding='utf-8') as f_obj: for line in disc[number][1]: f_obj.write(str(line)+'\n') if loadsel == 'tool100': data_proc_regular(path, filename, number, scenario_time) elif loadsel == 'inertia': data_proc_inertia(path, filename, number) def run_rl(path, hr, md, loadsel, w2t): c_regular = [ "scenario(0, j1_p, j1_n, p_speed, p_tool, i_tool)", "scenario(0, j2_p, j2_n, p_speed, p_tool, i_tool)", "scenario(0, j3_p, j3_n, p_speed, p_tool, i_tool)", "scenario(0, j4_p, j4_n, p_speed, p_tool, i_tool)", "scenario(0, j5_p, j5_n, p_speed, p_tool, i_tool)", "scenario(0, j6_p, j6_n, p_speed, p_tool, i_tool)", "scenario(1, j6_p, j6_n, p_speed, p_tool, i_tool)", "scenario(2, j6_p, j6_n, p_speed, p_tool, i_tool)", "scenario(3, j6_p, j6_n, p_speed, p_tool, i_tool)", "scenario(4, j1_hold, j1_hold, p_speed, p_tool, i_tool)", "scenario(4, j2_hold, j2_hold, p_speed, p_tool, i_tool)", "scenario(4, j3_hold, j3_hold, p_speed, p_tool, i_tool)", "scenario(4, j4_hold, j4_hold, p_speed, p_tool, i_tool)", "scenario(4, j5_hold, j5_hold, p_speed, p_tool, i_tool)", "scenario(4, j6_hold, j6_hold, p_speed, p_tool, i_tool)", ] c_inertia = [ "scenario(5, j4_p_inertia, j4_n_inertia, p_speed, p_tool, i_tool)", "scenario(5, j5_p_inertia, j5_n_inertia, p_speed, p_tool, i_tool)", "scenario(5, j6_p_inertia, j6_n_inertia, p_speed, p_tool, i_tool)", ] disc_regular = { 0: ['一轴', []], 1: ['二轴', []], 2: ['三轴', []], 3: ['四轴', []], 4: ['五轴', []], 5: ['六轴', []], 6: ['场景一', []], 7: ['场景二', []], 8: ['场景三', []], 9: ['一轴保持', []], 10: ['二轴保持', []], 11: ['三轴保持', []], 12: ['四轴保持', []], 13: ['五轴保持', []], 14: ['六轴保持', []] } disc_inertia = {0: ['四轴惯量', []], 1: ['五轴惯量', []], 2: ['六轴惯量', []]} if loadsel == 'tool100': conditions = c_regular disc = disc_regular elif loadsel == 'inertia': conditions = c_inertia disc = disc_inertia for condition in conditions: number = conditions.index(condition) w2t(f"正在执行{disc[number][0]}测试......", 0, 0, 'purple', 'Automatic Test') # 1. 关闭诊断曲线，触发软急停，并解除，目的是让可能正在运行着的机器停下来，切手动模式并下电 _response = execution('diagnosis.open', hr, w2t, open=False, display_open=False) md.trigger_estop() md.reset_estop() md.write_act(False) sleep(1) # 让曲线彻底关闭 _response = execution('state.switch_manual', hr, w2t) _response = execution('state.switch_motor_off', hr, w2t) # 2. 修改未要执行的场景 ssh = SSHClient() ssh.set_missing_host_key_policy(AutoAddPolicy()) ssh.connect('192.168.0.160', 22, username='luoshi', password='luoshi2019') cmd = 'cd /home/luoshi/bin/controller/; ' cmd += 'sudo sed -i "/scenario/d" projects/target/_build/current/main.mod; ' cmd += f'sudo sed -i "/DONOTDELETE/i {condition}" projects/target/_build/current/main.mod' stdin, stdout, stderr = ssh.exec_command(cmd, get_pty=True) stdin.write('luoshi2019' + '\n') stdin.flush() print(stdout.read().decode()) # 必须得输出一下stdout，才能正确执行sudo print(stderr.read().decode()) # 顺便也执行以下stderr # 3. reload工程后，pp2main，并且自动模式和上电 prj_path = 'target/_build/target.prj' _response = execution('overview.reload', hr, w2t, prj_path=prj_path, tasks=['current']) _response = execution('overview.get_cur_prj', hr, w2t) _response = execution('rl_task.pp_to_main', hr, w2t, tasks=['current']) _response = execution('state.switch_auto', hr, w2t) _response = execution('state.switch_motor_on', hr, w2t) # 4. 开始运行程序，单轴运行15s _response = execution('rl_task.run', hr, w2t, tasks=['current']) _t_start = time() while True: if md.read_ready_to_go() == 1: md.write_act(True) break else: if (time() - _t_start) // 20 > 1: w2t("20s内未收到机器人的运行信号，需要确认RL程序编写正确并正常执行...", 0, 111, 'red', 'Automatic Test') else: sleep(1) # 5. 打开诊断曲线，并执行采集 sleep(10) # 保证程序已经运行起来，其实主要是为了保持电流的采集而设定 _response = execution('diagnosis.open', hr, w2t, open=True, display_open=True) display_pdo_params = [ {"name": "hw_joint_vel_feedback", "channel": 0}, {"name": "hw_joint_vel_feedback", "channel": 1}, {"name": "hw_joint_vel_feedback", "channel": 2}, {"name": "hw_joint_vel_feedback", "channel": 3}, {"name": "hw_joint_vel_feedback", "channel": 4}, {"name": "hw_joint_vel_feedback", "channel": 5}, {"name": "device_servo_trq_feedback", "channel": 0}, {"name": "device_servo_trq_feedback", "channel": 1}, {"name": "device_servo_trq_feedback", "channel": 2}, {"name": "device_servo_trq_feedback", "channel": 3}, {"name": "device_servo_trq_feedback", "channel": 4}, {"name": "device_servo_trq_feedback", "channel": 5}, {"name": "device_safety_estop", "channel": 0}, ] _response = execution('diagnosis.set_params', hr, w2t, display_pdo_params=display_pdo_params) scenario_time = 0 if number < 6: sleep(35) elif number > 8: sleep(15) else: _t_start = time() while True: scenario_time = md.read_scenario_time() if float(scenario_time) > 1: w2t(f"场景{number-5}的周期时间：{scenario_time}", 0, 0, 'green', 'Automatic Test') break else: if (time()-_t_start)//60 > 3: w2t(f"未收到场景{number-5}的周期时间，需要确认RL程序编写正确并正常执行...", 0, 111, 'red', 'Automatic Test') else: sleep(5) sleep(1) # 一定要延迟一秒再读一次scenario time寄存器，因为一开始读取的数值不准确 scenario_time = md.read_scenario_time() sleep(float(scenario_time)*0.2) # 再运行周期的20%即可 # 6. 关闭诊断曲线，停止程序运行，下电并且换成手动模式 _response = execution('diagnosis.open', hr, w2t, open=False, display_open=False) _response = execution('rl_task.stop', hr, w2t, tasks=['current']) _response = execution('state.switch_motor_off', hr, w2t) _response = execution('state.switch_manual', hr, w2t) sleep(1) # 保证所有数据均已返回 # 7. 保留数据并处理输出 for _msg in hr.c_msg: if 'diagnosis.result' in _msg: disc[number][1].insert(0, loads(_msg)) else: _index = 210 for _msg in hr.c_msg: if 'diagnosis.result' in _msg: _index = hr.c_msg.index(_msg) break del hr.c_msg[_index:] hr.c_msg_xs.clear() gen_result_file(path, loadsel, disc, number, scenario_time) else: if loadsel == 'tool100': w2t("单轴和场景电机电流采集完毕，如需采集惯量负载，须切换负载类型，并更换惯量负载，重新执行。", 0, 0, 'green', 'Automatic Test') elif loadsel == 'inertia': w2t("惯量负载电机电流采集完毕，如需采集单轴/场景/保持电机电流，须切换负载类型，并更换偏置负载，重新执行。", 0, 0, 'green', 'Automatic Test') def main(path, hr, md, loadsel, w2t): data_dirs, data_files = traversal_files(path, w2t) config_file, current_file, prj_file = check_files(path, loadsel, data_dirs, data_files, w2t) prj_to_xcore(prj_file) run_rl(path, hr, md, loadsel, w2t) if __name__ == '__main__': main(*argv[1:])