gitea
82ae2681bb
1. [main: current.py] - 修正堵转电流无法正确写入结果文件的问题 2. [main: do_brake.py] - 初始速度采集等待时间设置为可通过configs.xlsx配置文件调整的 - 初次速度采集停止逻辑修改为tasks.stop指令（未验证） - 急停信号触发前，pending时间设置为固定值10s - 实现正负方向速度采集逻辑 - 工程名变更逻辑实现修改为通配符，方便后续根据机型保存文件 - 增加超差后写诊断的逻辑，并可以通过configs.xlsx配置文件调整 - 程序输出中增加时间戳，方便调试定位日志时间 3. [main: do_current.py] - 工程名变更逻辑实现修改为通配符，方便后续根据机型保存文件 4. 为工程文件添加更详细的注释 5. 补充了do_current/do_brake的流程图 6. [main: openapi.py] - ½«modbus motor_on/offµÄµÏ·½·¨¸Äª¸ߵç³崥·¢ 7. configs.xlsx配置表新增write_diagnosis/get_init_speed两个参数
349 lines
18 KiB
Python
349 lines
18 KiB
Python
from time import sleep, time, strftime, localtime
|
||
from sys import argv
|
||
from os import scandir, mkdir
|
||
from os.path import exists
|
||
from paramiko import SSHClient, AutoAddPolicy
|
||
from json import loads
|
||
from openpyxl import load_workbook
|
||
import pandas
|
||
|
||
RADIAN = 57.3 # 180 / 3.1415926
|
||
tab_name = 'Automatic Test'
|
||
|
||
|
||
def traversal_files(path, w2t):
|
||
if not exists(path):
|
||
msg = f'数据文件夹{path}不存在，请确认后重试......'
|
||
w2t(msg, 0, 1, 'red', tab_name)
|
||
else:
|
||
dirs = []
|
||
files = []
|
||
for item in scandir(path):
|
||
if item.is_dir():
|
||
dirs.append(item.path)
|
||
elif item.is_file():
|
||
files.append(item.path)
|
||
|
||
return dirs, files
|
||
|
||
|
||
def check_files(path, loadsel, data_dirs, data_files, w2t):
|
||
if len(data_dirs) != 0 or len(data_files) != 5:
|
||
w2t('初始路径下不允许有文件夹，且初始路径下只能存在如下五个文件，确认后重新运行！', 0, 0, 'red', tab_name)
|
||
w2t(' 1. configs.xlsx\n 2. reach33/reach66/reach100_xxxx.xlsx\n 3. xxxx.zip', 0, 1, 'red', tab_name)
|
||
|
||
config_file = reach33 = reach66 = reach100 = prj_file = None
|
||
for data_file in data_files:
|
||
filename = data_file.split('\\')[-1]
|
||
if filename == 'configs.xlsx':
|
||
config_file = data_file
|
||
elif filename.startswith('reach33_') and filename.endswith('.xlsx'):
|
||
reach33 = data_file
|
||
elif filename.startswith('reach66_') and filename.endswith('.xlsx'):
|
||
reach66 = data_file
|
||
elif filename.startswith('reach100_') and filename.endswith('.xlsx'):
|
||
reach100 = data_file
|
||
elif filename.endswith('.zip'):
|
||
prj_file = data_file
|
||
else:
|
||
w2t('初始路径下不允许有文件夹，且初始路径下只能存在如下五个文件，确认后重新运行！', 0, 0, 'red', tab_name)
|
||
w2t(' 1. configs.xlsx\n 2. reach33/reach66/reach100_xxxx.xlsx\n 3. xxxx.zip', 0, 2, 'red', tab_name)
|
||
|
||
if config_file and reach33 and reach66 and reach100 and prj_file:
|
||
result_dirs = []
|
||
mkdir(f"{path}\\j1")
|
||
mkdir(f"{path}\\j2")
|
||
mkdir(f"{path}\\j3")
|
||
|
||
for _reach in ['reach33', 'reach66', 'reach100']:
|
||
for _load in [f'load{loadsel.removeprefix("tool")}']:
|
||
for _speed in ['speed33', 'speed66', 'speed100']:
|
||
dir_name = '_'.join([_reach, _load, _speed])
|
||
result_dirs.append(dir_name)
|
||
mkdir(f"{path}\\j1\\{dir_name}")
|
||
mkdir(f"{path}\\j2\\{dir_name}")
|
||
if _reach == 'reach100':
|
||
mkdir(f"{path}\\j3\\{dir_name}")
|
||
|
||
w2t("数据目录合规性检查结束，未发现问题......", 0, 0, 'blue', tab_name)
|
||
return config_file, reach33, reach66, reach100, prj_file, result_dirs
|
||
else:
|
||
w2t('初始路径下不允许有文件夹，且初始路径下只能存在如下五个文件，确认后重新运行！', 0, 0, 'red', tab_name)
|
||
w2t(' 1. configs.xlsx\n 2. reach33/reach66/reach100_xxxx.xlsx\n 3. xxxx.zip', 0, 1, 'red', tab_name)
|
||
|
||
|
||
def prj_to_xcore(prj_file):
|
||
ssh = SSHClient()
|
||
ssh.set_missing_host_key_policy(AutoAddPolicy())
|
||
ssh.connect('192.168.0.160', 22, username='luoshi', password='luoshi2019')
|
||
sftp = ssh.open_sftp()
|
||
sftp.put(prj_file, '/tmp/target.zip')
|
||
cmd = 'cd /tmp; rm -rf target/; mkdir target; unzip -d target/ -q target.zip; '
|
||
cmd += 'chmod 777 -R target/; rm target.zip'
|
||
ssh.exec_command(cmd)
|
||
|
||
cmd = 'sudo rm -rf /home/luoshi/bin/controller/projects/target; '
|
||
cmd += 'sudo mv /tmp/target/ /home/luoshi/bin/controller/projects/'
|
||
stdin, stdout, stderr = ssh.exec_command(cmd, get_pty=True)
|
||
stdin.write('luoshi2019' + '\n')
|
||
stdin.flush()
|
||
print(stdout.read().decode()) # 必须得输出一下stdout，才能正确执行sudo
|
||
print(stderr.read().decode()) # 顺便也执行以下stderr
|
||
|
||
# _prj_name = prj_file.split('\\')[-1].removesuffix('.zip')
|
||
cmd = 'cd /home/luoshi/bin/controller/; '
|
||
cmd += f'sudo mv projects/target/_build/*.prj projects/target/_build/target.prj'
|
||
stdin, stdout, stderr = ssh.exec_command(cmd, get_pty=True)
|
||
stdin.write('luoshi2019' + '\n')
|
||
stdin.flush()
|
||
print(stdout.read().decode()) # 必须得输出一下stdout，才能正确执行sudo
|
||
print(stderr.read().decode()) # 顺便也执行以下stderr
|
||
ssh.close()
|
||
|
||
|
||
def execution(cmd, hr, w2t, **kwargs):
|
||
_id = hr.execution(cmd, **kwargs)
|
||
_msg = hr.get_from_id(_id)
|
||
if not _msg:
|
||
w2t(f"无法获取{_id}请求的响应信息", 0, 6, 'red', tab_name)
|
||
else:
|
||
_response = loads(_msg)
|
||
if not _response:
|
||
w2t(f"无法获取{id}请求的响应信息", 0, 1, 'red', tab_name)
|
||
return _response
|
||
|
||
|
||
def gen_result_file(path, curve_data, axis, _reach, _load, _speed, count):
|
||
_d2d_vel = {'hw_joint_vel_feedback': []}
|
||
_d2d_trq = {'device_servo_trq_feedback': []}
|
||
_d2d_stop = {'device_safety_estop': []}
|
||
for data in curve_data:
|
||
dict_results = data['data']
|
||
for item in dict_results:
|
||
item['value'].reverse()
|
||
if item.get('channel', None) == axis-1 and item.get('name', None) == 'hw_joint_vel_feedback':
|
||
_d2d_vel['hw_joint_vel_feedback'].extend(item['value'])
|
||
elif item.get('channel', None) == axis-1 and item.get('name', None) == 'device_servo_trq_feedback':
|
||
_d2d_trq['device_servo_trq_feedback'].extend(item['value'])
|
||
elif item.get('channel', None) == 0 and item.get('name', None) == 'device_safety_estop':
|
||
_d2d_stop['device_safety_estop'].extend(item['value'])
|
||
|
||
df1 = pandas.DataFrame.from_dict(_d2d_vel)
|
||
df2 = pandas.DataFrame.from_dict(_d2d_trq)
|
||
df3 = pandas.DataFrame.from_dict(_d2d_stop)
|
||
df = pandas.concat([df1, df2, df3], axis=1)
|
||
_filename = f"{path}\\j{axis}\\reach{_reach}_load{_load}_speed{_speed}\\reach{_reach}_load{_load}_speed{_speed}_{count}.data"
|
||
df.to_csv(_filename, sep='\t', index=False)
|
||
|
||
|
||
def run_rl(path, loadsel, hr, md, config_file, result_dirs, w2t):
|
||
_count = 0
|
||
display_pdo_params = [
|
||
{"name": "hw_joint_vel_feedback", "channel": 0},
|
||
{"name": "hw_joint_vel_feedback", "channel": 1},
|
||
{"name": "hw_joint_vel_feedback", "channel": 2},
|
||
{"name": "hw_joint_vel_feedback", "channel": 3},
|
||
{"name": "hw_joint_vel_feedback", "channel": 4},
|
||
{"name": "hw_joint_vel_feedback", "channel": 5},
|
||
{"name": "device_servo_trq_feedback", "channel": 0},
|
||
{"name": "device_servo_trq_feedback", "channel": 1},
|
||
{"name": "device_servo_trq_feedback", "channel": 2},
|
||
{"name": "device_servo_trq_feedback", "channel": 3},
|
||
{"name": "device_servo_trq_feedback", "channel": 4},
|
||
{"name": "device_servo_trq_feedback", "channel": 5},
|
||
{"name": "device_safety_estop", "channel": 0},
|
||
]
|
||
wb = load_workbook(config_file, read_only=True)
|
||
ws = wb['Target']
|
||
write_diagnosis = float(ws.cell(row=3, column=10).value)
|
||
get_init_speed = float(ws.cell(row=4, column=10).value)
|
||
if ws.cell(row=1, column=1).value == 'positive':
|
||
md.write_pon(1)
|
||
elif ws.cell(row=1, column=1).value == 'negative':
|
||
md.write_pon(0)
|
||
else:
|
||
w2t("configs.xlsx中Target页面A1单元格填写不正确，检查后重新运行...", 0, 111, 'red', tab_name)
|
||
|
||
for condition in result_dirs:
|
||
_reach = condition.split('_')[0].removeprefix('reach')
|
||
_load = condition.split('_')[1].removeprefix('load')
|
||
_speed = condition.split('_')[2].removeprefix('speed')
|
||
# if _speed != '100' or _reach != '100':
|
||
# continue
|
||
for axis in range(1, 4):
|
||
md.write_axis(axis)
|
||
speed_max = 0
|
||
if axis == 3 and _reach != '100':
|
||
continue
|
||
|
||
w2t(f"-"*90, 0, 0, 'purple', tab_name)
|
||
|
||
for count in range(1, 4):
|
||
_count += 1
|
||
this_time = strftime("%Y-%m-%d %H:%M:%S", localtime(time()))
|
||
prj_path = 'target/_build/target.prj'
|
||
w2t(f"[{this_time} | {_count}/63] 正在执行 {axis} 轴 {condition} 的第 {count} 次制动测试...", 0, 0, 'purple', tab_name)
|
||
|
||
# 1. 关闭诊断曲线，触发软急停，并解除，目的是让可能正在运行着的机器停下来，切手动模式并下电
|
||
md.trigger_estop()
|
||
md.reset_estop()
|
||
md.clear_alarm()
|
||
md.write_act(0)
|
||
_response = execution('diagnosis.open', hr, w2t, open=True, display_open=True)
|
||
sleep(write_diagnosis) # 软急停超差后，等待写诊断时间，可通过configs.xlsx配置
|
||
_response = execution('diagnosis.open', hr, w2t, open=False, display_open=False)
|
||
|
||
while count == 1:
|
||
# 2. 修改未要执行的场景
|
||
ssh = SSHClient()
|
||
ssh.set_missing_host_key_policy(AutoAddPolicy())
|
||
ssh.connect('192.168.0.160', 22, username='luoshi', password='luoshi2019')
|
||
if ws.cell(row=1, column=1).value == 'positive':
|
||
_rl_cmd = f"brake_E(j{axis}_{_reach}_p, j{axis}_{_reach}_n, p_speed, p_tool)"
|
||
elif ws.cell(row=1, column=1).value == 'negative':
|
||
_rl_cmd = f"brake_E(j{axis}_{_reach}_n, j{axis}_{_reach}_p, p_speed, p_tool)"
|
||
else:
|
||
w2t("configs.xlsx中Target页面A1单元格填写不正确，检查后重新运行...", 0, 111, 'red', tab_name)
|
||
_rl_speed = f"VelSet {_speed}"
|
||
_rl_tool = f"tool p_tool = tool{loadsel.removeprefix('tool')}"
|
||
cmd = 'cd /home/luoshi/bin/controller/; '
|
||
cmd += 'sudo sed -i "/brake_E/d" projects/target/_build/brake/main.mod; '
|
||
cmd += f'sudo sed -i "/DONOTDELETE/i {_rl_cmd}" projects/target/_build/brake/main.mod; '
|
||
cmd += 'sudo sed -i "/VelSet/d" projects/target/_build/brake/main.mod; '
|
||
cmd += f'sudo sed -i "/MoveAbsJ/i {_rl_speed}" projects/target/_build/brake/main.mod; '
|
||
cmd += 'sudo sed -i "/tool p_tool/d" projects/target/_build/brake/main.mod; '
|
||
cmd += f'sudo sed -i "/VelSet/i {_rl_tool}" projects/target/_build/brake/main.mod; '
|
||
stdin, stdout, stderr = ssh.exec_command(cmd, get_pty=True)
|
||
stdin.write('luoshi2019' + '\n')
|
||
stdin.flush()
|
||
print(stdout.read().decode()) # 必须得输出一下stdout，才能正确执行sudo
|
||
print(stderr.read().decode()) # 顺便也执行以下stderr
|
||
|
||
# 3. reload工程后，pp2main，并且自动模式和上电，最后运行程序
|
||
_response = execution('overview.reload', hr, w2t, prj_path=prj_path, tasks=['brake', 'stop0_related'])
|
||
_response = execution('rl_task.pp_to_main', hr, w2t, tasks=['brake', 'stop0_related'])
|
||
_response = execution('state.switch_auto', hr, w2t)
|
||
_response = execution('state.switch_motor_on', hr, w2t)
|
||
_response = execution('rl_task.run', hr, w2t, tasks=['brake', 'stop0_related'])
|
||
_t_start = time()
|
||
while True:
|
||
if md.read_ready_to_go() == 1:
|
||
md.write_act(True)
|
||
break
|
||
else:
|
||
if (time() - _t_start) // 20 > 1:
|
||
w2t("20s内未收到机器人的运行信号，需要确认RL程序编写正确并正常执行...", 0, 111, 'red', tab_name)
|
||
else:
|
||
sleep(1)
|
||
# 4. 打开诊断曲线，并执行采集，之后触发软急停，关闭曲线采集，找出最大速度，传递给RL程序，最后清除相关记录
|
||
_response = execution('diagnosis.open', hr, w2t, open=True, display_open=True)
|
||
_response = execution('diagnosis.set_params', hr, w2t, display_pdo_params=display_pdo_params)
|
||
sleep(get_init_speed) # 获取实际最大速度，可通过configs.xlsx配置
|
||
_response = execution('rl_task.stop', hr, w2t, tasks=['brake'])
|
||
sleep(1)
|
||
_response = execution('state.switch_motor_off', hr, w2t)
|
||
_response = execution('state.switch_manual', hr, w2t)
|
||
_response = execution('diagnosis.open', hr, w2t, open=False, display_open=False)
|
||
# 找出最大速度
|
||
for _msg in hr.c_msg:
|
||
if 'diagnosis.result' in _msg:
|
||
dict_results = loads(_msg)['data']
|
||
for item in dict_results:
|
||
if item.get('channel', None) == axis-1 and item.get('name', None) == 'hw_joint_vel_feedback':
|
||
_ = RADIAN * sum(item['value']) / len(item['value'])
|
||
if ws.cell(row=1, column=1).value == 'positive':
|
||
speed_max = max(_, speed_max)
|
||
elif ws.cell(row=1, column=1).value == 'negative':
|
||
speed_max = min(_, speed_max)
|
||
print(f"speed max = {speed_max}")
|
||
speed_max = abs(speed_max)
|
||
speed_target = float(ws.cell(row=3, column=axis+1).value) * float(_speed) / 100
|
||
if speed_max < speed_target*0.95 or speed_max > speed_target*1.05:
|
||
w2t(f"Axis: {axis}-{count} | Speed: {speed_max} | Shouldbe: {speed_target}", 0, 0, 'indigo', tab_name)
|
||
|
||
md.write_speed_max(speed_max)
|
||
sleep(1)
|
||
|
||
for _msg in hr.c_msg:
|
||
if 'diagnosis.result' in _msg:
|
||
_index = hr.c_msg.index(_msg)
|
||
del hr.c_msg[_index:]
|
||
hr.c_msg_xs.clear()
|
||
break
|
||
|
||
if speed_max < 10:
|
||
md.clear_alarm()
|
||
w2t("未获取到正确的速度，即将重新获取...", 0, 0, 'red', tab_name)
|
||
continue
|
||
else:
|
||
break
|
||
|
||
# 5. 清除软急停，重新运行程序，并打开曲线发送继续运动信号，当速度达到最大值时，通过DO触发急停
|
||
md.reset_estop() # 其实没必要
|
||
md.clear_alarm()
|
||
|
||
_response = execution('overview.reload', hr, w2t, prj_path=prj_path, tasks=['brake', 'stop0_related'])
|
||
_response = execution('rl_task.pp_to_main', hr, w2t, tasks=['brake', 'stop0_related'])
|
||
_response = execution('state.switch_auto', hr, w2t)
|
||
_response = execution('state.switch_motor_on', hr, w2t)
|
||
_response = execution('rl_task.run', hr, w2t, tasks=['brake', 'stop0_related'])
|
||
for i in range(3):
|
||
if md.read_ready_to_go() == 1:
|
||
md.write_act(1)
|
||
break
|
||
else:
|
||
sleep(1)
|
||
else:
|
||
w2t("未收到机器人的运行信号，需要确认RL程序编写正确并正常执行...", 0, 111, 'red', tab_name)
|
||
|
||
_response = execution('diagnosis.open', hr, w2t, open=True, display_open=True)
|
||
_response = execution('diagnosis.set_params', hr, w2t, display_pdo_params=display_pdo_params)
|
||
sleep(10) # 排除从其他位姿到零点位姿，再到轴极限位姿的时间
|
||
md.write_probe(1)
|
||
_t_start = time()
|
||
while True:
|
||
if md.read_brake_done() == 1:
|
||
sleep(1) # 保证速度归零
|
||
md.write_probe(0)
|
||
_response = execution('diagnosis.open', hr, w2t, open=False, display_open=False)
|
||
break
|
||
else:
|
||
if (time() - _t_start) > 30:
|
||
w2t(f"30s内未触发急停，该条数据无效，需要确认RL/Python程序编写正确并正常执行，或者判别是否是机器本体问题，比如正负方向速度是否一致...", 0, 0, 'red', tab_name)
|
||
md.write_probe(0)
|
||
_response = execution('diagnosis.open', hr, w2t, open=False, display_open=False)
|
||
break
|
||
else:
|
||
sleep(1)
|
||
|
||
# 6. 保留数据并处理输出
|
||
curve_data = []
|
||
for _msg in hr.c_msg:
|
||
if 'diagnosis.result' in _msg:
|
||
curve_data.insert(0, loads(_msg))
|
||
else:
|
||
for _msg in hr.c_msg:
|
||
if 'diagnosis.result' in _msg:
|
||
_index = hr.c_msg.index(_msg)
|
||
del hr.c_msg[_index:]
|
||
hr.c_msg_xs.clear()
|
||
break
|
||
gen_result_file(path, curve_data, axis, _reach, _load, _speed, count)
|
||
else:
|
||
w2t(f"\n{loadsel.removeprefix('tool')}%负载的制动性能测试执行完毕，如需采集其他负载，须切换负载类型，并更换其他负载，重新执行。", 0, 0, 'green', tab_name)
|
||
|
||
|
||
def main(path, hr, md, loadsel, w2t):
|
||
_s_time = time()
|
||
data_dirs, data_files = traversal_files(path, w2t)
|
||
config_file, reach33, reach66, reach100, prj_file, result_dirs = check_files(path, loadsel, data_dirs, data_files, w2t)
|
||
prj_to_xcore(prj_file)
|
||
run_rl(path, loadsel, hr, md, config_file, result_dirs, w2t)
|
||
_e_time = time()
|
||
time_total = _e_time - _s_time
|
||
w2t(f"处理总时长：{time_total // 3600:02.0f} h {time_total % 3600 // 60:02.0f} m {time_total % 60:02.0f} s", 0, 0, 'green', tab_name)
|
||
|
||
|
||
if __name__ == '__main__':
|
||
main(*argv[1:])
|